The https://github.com/espressif/esp-thread-br project is optimized for Espressif's ESP Thread Border Router pcb - which I don't own.
The RCP update logic is disabled so reset/boot are not needed. The radio coexistence pins are not needed when using ethernet and i opted for UART instead of SPI so there's really just TX/RX and power to connect between the two boards.
This should be a nice "cheap esp32 thread border router" open source project with a bit of polish🤔.
So after 100 combinations of "ot reset" "ot factoryreset" "ot dataset set active ..." and "ot dataset commit" the esp32 otbr keeps it's dataset in NVS.
I now have a working embedded ESP32 ethernet thread border router 🥳. I obviously prefer this to apple/google/amazon cloud connected thread border routers.
Now i need to design a case and retire the otbr haos add-on and USB radio. And automate the build process in #forgejo CI.
The https://github.com/espressif/esp-thread-br project is optimized for Espressif's ESP Thread Border Router pcb - which I don't own.
The RCP update logic is disabled so reset/boot are not needed. The radio coexistence pins are not needed when using ethernet and i opted for UART instead of SPI so there's really just TX/RX and power to connect between the two boards.
This should be a nice "cheap esp32 thread border router" open source project with a bit of polish🤔.
So after 100 combinations of "ot reset" "ot factoryreset" "ot dataset set active ..." and "ot dataset commit" the esp32 otbr keeps it's dataset in NVS.
I now have a working embedded ESP32 ethernet thread border router 🥳. I obviously prefer this to apple/google/amazon cloud connected thread border routers.
Now i need to design a case and retire the otbr haos add-on and USB radio. And automate the build process in #forgejo CI.
Adventures with #thread: This is a ESP32-S3 with W5500 Ethernet. It has a UART connection to a small ESP32-C6 running Openthread RCP firmware.
The S3 is running a full openthread border router with NAT64 and web interface, currently forming its own network. Have to figure out how to join it to my existing network next.
All software is espressif‘s sample implementations configured and compiled locally.
So after 100 combinations of "ot reset" "ot factoryreset" "ot dataset set active ..." and "ot dataset commit" the esp32 otbr keeps it's dataset in NVS.
I now have a working embedded ESP32 ethernet thread border router 🥳. I obviously prefer this to apple/google/amazon cloud connected thread border routers.
Now i need to design a case and retire the otbr haos add-on and USB radio. And automate the build process in #forgejo CI.
Moin ihr Tröten. Die Nacht war ein wenig besser. Jetzt gibt es erstmal Kaffee im Bett. ☕️🛏️
Um 09:20Uhr ist dann #Mauszeit.
Ich werde mich vielleicht heute noch ein bisschen mit meinem #openWRT auf dem #RaspberryPi beschäftigen. Habe gestern noch Videos zu openWRT gesehen. Aber die waren auch teilweise verwirrend. Mus mal suchen, ob ich andere finde. Es erscheint mir etwas merkwürdig, dass ich eine Bridge definieren MUSS, die an die physische Schnittstelle gebunden wird um dann in dieser Bridge die ganzen VLANs zu definieren. Damit wäre die Bridge bei openWRT quasi ein Container für die VLANs. Das erschließt sich mir so nicht.
Das ich was #Netzwerke angeht nur absolutes Grundwissen habe ist da auch nicht hilfreich. Und #IPv6 habe ich auch immernoch nicht durchdrungen. Ich werde also wohl alles wieder auf #IPv4 aufbauen. Das kenne und verstehe ich wenigstens.
Telefonisch bei Vodafone echtes Dualstack beantragt. Das ging gerade an der Telefonhotline (ja, am Samstagnachmittag!) viel zu einfach und zu schnell, da muss noch ein Haken sein 🧐 Nur wenige Minuten Wartezeit, keine Erklärung notwendig, wird einfach so gemacht.
Kaum aufgelegt, schon startete das Modem neu und bietet jetzt die begehrten Optionen für den Bridge Modus 🤯
Das passt gerade nicht so richtig zu den sonstigen Erfahrungen in Sachen Kundendienst mit dem Laden...
Telefonisch bei Vodafone echtes Dualstack beantragt. Das ging gerade an der Telefonhotline (ja, am Samstagnachmittag!) viel zu einfach und zu schnell, da muss noch ein Haken sein 🧐 Nur wenige Minuten Wartezeit, keine Erklärung notwendig, wird einfach so gemacht.
Kaum aufgelegt, schon startete das Modem neu und bietet jetzt die begehrten Optionen für den Bridge Modus 🤯
Das passt gerade nicht so richtig zu den sonstigen Erfahrungen in Sachen Kundendienst mit dem Laden...
Urge to figure out #ipv6 rising.
This is probably the head cold I feel coming on but my frustration with the Omada gateway I have at my home network edge is peaking again. It's just so limited! For example, there's a bug where it purports to request a /60 PD but then only lets you use the first subnet.
I think I'm gonna set up a testing VLAN with that single subnet and game out a Debian-based router VM. That should be sufficiently safe to do while fuzzy headed.
Update: the Omada controller stopped letting me make any substantive updates to my VLANs. I don't know exactly what's going on with it (the error is unsearchable), but it's a pain in the butt.
I ordered a Mikrotik RB5009. By all accounts a powerful piece of kit. I had a CRS-305 for awhile so I'm familiar with RouterOS, just never actually used it as a router before. Hopefully with the Omada gateway out of the picture the controller will start behaving better. #ipv6 #homelab #selfhosted
It’s official and we are proud as hell! 😎
sys4 will send 3 of its experts to work at the EU commissions’ Multistakeholder Forum on Internet Standards Deployment „to guide deployment of key Internet standards under NIS2 network security measures and promote wider industry uptake.“
We - @cstrotm (DNS / DNSSEC), Gert Doering (IPv6, RPKI) and @patrickbenkoetter (TLS, DANE, MTA-STS, SPF, DKIM, DMARC) - will work on recommendations and best practices.
Our intent is to recommend what’s reasonable for customer security on the Internet and we expect the one or the other company to disagree for economic reasons. Like they have disagreed since we started to talk with them more than 10 years ago. And the market didn’t fix it. Well… let’s see if working in the Forum will do the trick.
https://digital-strategy.ec.europa.eu/en/news/european-commission-seeks-participants-multi-stakeholder-forum-internet-standards-deployment
#dns #dnssec #ipv6 #rpki #tls #dane #mtasts #spf #dkim #dmarc
Watched #HideakiYoshifuji's 2009 Linux.conf.au talk on "Evolution of #Multicast Engine on #Linux": https://www.youtube.com/watch?v=yjctk8NZjG0
And was like, "oh, that wasn't that long ago, that was around when the @batadv Linux kernel implementation was started, too."
And then I realized, oh, wait, @batadv was started quite a while ago :D.
Evolution of Multicast Engine on Linux
YouTube
Watched #HideakiYoshifuji's 2009 Linux.conf.au talk on "Evolution of #Multicast Engine on #Linux": https://www.youtube.com/watch?v=yjctk8NZjG0
And was like, "oh, that wasn't that long ago, that was around when the @batadv Linux kernel implementation was started, too."
And then I realized, oh, wait, @batadv was started quite a while ago :D.
Evolution of Multicast Engine on Linux
YouTube
Kann das WLAN denn wenigstens #IPv6? Oder muss man, um das Internet nutzen zu können, dann doch wieder aufs Mobilfunknetz ausweichen?
#GutenMorgen, Ihr lieben Tröten!
War es eine gute Idee, in Hamburg in den #ECE5 der Schweizer Bundesbahn zu steigen? Spannendes Experiment jedenfalls.
WLAN/Internet nur nach SMS-Registrierung; das System kann kein https und funktioniert nicht im privaten Browser. Abfahrt +35, aber vor dem geplanten ICE auf dem Nachbargleis.
Sitze finde ich gut, schön geräumig und hell alles. Passt richtig gut in das Schneegestöber draußen.
Habt 1 wunderbaren Tag!
Kann das WLAN denn wenigstens #IPv6? Oder muss man, um das Internet nutzen zu können, dann doch wieder aufs Mobilfunknetz ausweichen?
