These are the tool cabinets I have been making for the Community Workshop. Each one is about 1000 x 2000 x 200mm and used 4 sheets of 18mm plywood.
I built them as sealed boxes and then cut the door out, fitting the hinges as I went.
The right hand one has a narrower door as it needed to clear the work top and the electric/water intake. The deep recess behind the hinges will be used for sash cramp storage.
I still need to make the rest of the tool racks inside, and tidy them up.
They are mounted on the shipping container doors so that the doors can still open when needed and the tools access from outside.
Q2: @MakersHour
What has been your favourite make of 2025? Tell us about it. #MakersHour
A2: I can’t remember what I have done in 2025!
I think my favourite mike will probably be the big tool cabinets at the community workshop. They are a little rough around the edges but they work. Two cabinets, each 2000 x 1000 x 200mm and both made from four sheets of 18mm plywood. They hang on the doors of a shipping container so that the doors can still be opened outwards.
https://cupoftea.social/@Maker_of_Things/115464515779662063
