I just learned: Most modern #mikrotik devices support dual power inputs. Either they have PoE and DC input or two/more separate DC inputs.

It will always choose the higher voltage if both inputs are powered, so I got a 24V and a 48V PSU. The PoE should be passive PoE (using Mikrotik's injector) for it to work.

Why am I doing this? One of the power paths goes through my lifepo4 UPS. This way I can unplug the UPS and do maintenance / go camping with it without any downtime.

I just learned: Most modern #mikrotik devices support dual power inputs. Either they have PoE and DC input or two/more separate DC inputs.

It will always choose the higher voltage if both inputs are powered, so I got a 24V and a 48V PSU. The PoE should be passive PoE (using Mikrotik's injector) for it to work.

Why am I doing this? One of the power paths goes through my lifepo4 UPS. This way I can unplug the UPS and do maintenance / go camping with it without any downtime.

@version Finally!!! ❤️
„*) wireguard - allow to add AllowedIPs cofiguration for client configuration template“ #mikrotik

@version Finally!!! ❤️
„*) wireguard - allow to add AllowedIPs cofiguration for client configuration template“ #mikrotik

New version! #MikroTik RouterOS 7.21beta8 is available in the Testing channel https://mikrotik.com/download

Hardware Hacking: MikroTik 10GbE Copper Cooling

Adding a fan and heatsinks to a MikroTik CRS326-24G-2S+in network switch to cool a 10GbE SFP+ RJ45 module.

https://www.dlford.io/mikrotik-10gbe-copper-cooling-mod/

#mikrotik #hardware #hacking #networking